廣州安全帶萬能拉伸試驗機廠家 可對橡膠、塑料、塑膠、無紡布、紡織、尼龍、纖維、納米材料、高分子材料、復合材料、包裝帶、紙張、電線電纜、光纖光纜、安全帶、保險帶、皮革皮帶、鞋類、膠帶、聚合物、彈簧鋼、軸承鋼、不銹鋼（及其它高硬度鋼）、鑄件、鋼板、鋼帶、有色金屬、汽車零部件、合金材料及其它非金屬材料和金屬材料進行拉伸、壓縮、彎曲、撕裂等試驗。

廣州安全帶萬能拉伸試驗機廠家   性能特點 Performance characteristics：

微機控制電子萬能試驗機、采用*設計理念，外形美觀、操作方便、性能穩定可靠。計算機通過我公司研制的全數字控制系統進行采集控制、經全數字調速控制器直接控制全數字調速電機轉動、電機轉速經圓弧同步減速系統減速后傳遞給精密滾珠絲杠副實現橫梁上升、下降，完成試樣的拉伸、剝離、壓縮等力學性能試驗。

The microcomputer controlled electronic universal testing machine adopts the advanced design concept of foreign countries. It has the advantages of beautiful appearance, convenient operation and stable and reliable performance. Computer through the digital control system developed by our company for acquisition and control, the full digital speed controller in direct control of full digital speed regulating motor, motor speed reducer by arc synchronous reduction system is transferred to the precision ball screw to realize the beam up and down, finished peeling, tensile, compression properties of test specimens.

廣州安全帶萬能拉伸試驗機廠家 試驗機專業軟件實現自動求取定伸長率、定力伸長、抗拉強度、試樣延伸率、上、下屈服及屈服強度等數據，還可滿足位移保持控制。計算機控制系統對試驗過程的控制和數據處理符合相應金屬、非金屬及復合材料國家標準的要求、試驗報告多樣化如WORD、EXECEL等方式。

The test software realizes automatic determination of elongation, strength, elongation, tensile strength, sample elongation, upper and lower yield and yield strength. The displacement retention control can also be achieved. The control and data processing of the computer control system meet the requirements of the national standards for metal, nonmetal and composite materials, and the test reports are diversified, such as WORD, EXECEL and so on.

廣州安全帶萬能拉伸試驗機廠家 本機無污染、噪音低，效率高，具有較寬的調速范圍。本機適用于各種金屬、非金屬及復合材料的力學性能指標的測試，*符合國家相關標準的要求。

The utility model has the advantages of no pollution, low noise, high efficiency and wide speed regulating range. This machine is suitable for testing the mechanical properties of various metal, nonmetal and composite materials, and fully meets the requirements of relevant national standards.

該機廣泛應用于建筑建材、航空航天、機械制造、電線電纜、橡膠塑料、紡織、家電等行業的材料檢驗分析，是科研院校、大專院校、工礦企業、技術監督、商檢仲裁等部門的理想測試設備。

This machine is widely used in material inspection building materials, aerospace, machinery manufacturing, wire and cable, rubber plastic, textile, home appliance industry analysis, is the ideal test equipment, scientific research institutions, universities, industrial and mining enterprises, and technical supervision, arbitration and other departments.

廣州安全帶萬能拉伸試驗機廠家 試驗機儀表 Tester：

本儀表采用比較先進的放大器，A/D、微處理器、高性能高清晰的液晶顯示屏構成，整個系統采用類似手機PDA鍵盤，光標導航，全中文顯示，浮點數數據處理，結構簡單操作方便，自動計算存儲，適合于企業，質檢單位材料力學性能檢測儀表。

This instrument adopts international advanced amplifier, LCD display, A/D microprocessor, high performance and high clarity, the whole system adopts similar phone PDA keyboard, cursor navigation, full display Chinese, floating point data processing, simple structure and convenient operation, automatic calculation of storage, suitable for enterprise quality inspection unit, mechanics of materials performance testing instrument.

維護與保養 Maintenance and maintenance

1軸承內的潤滑脂一般3—5年更換一次。

2 試驗機應每年請當?shù)赜?jì)量部門檢定一次。

1 grease in bearings shall be replaced in 3 - 5 years.
2 test machines should be tested annually by local metrology department.

常見故障 Common faults：

1：上升、下降、試驗操作時，按下鍵后顯示停止

  解決方案：1：檢查系統設置當前量程設置和過載保護率

            2：檢查速度參數是否變化

            3：檢查傳感器是否過載

1: rise, fall, test operation, press the button to show stop
Solution: 1: check system settings, current range settings, and overload protection rates
          2: check the speed parameters change
          3: check whether the sensor is overloaded

2：上電后儀表藍屏

解決方案： 1：重新上電

           2：重新上電如果不行，拿到?jīng)]有干擾的地方上電試一下

           3：生產廠家更換液晶屏

2: after power on, instrument blue screen
Solution: 1: re power up
          2: re power, if not, get the place without interference, power test
          3: contact the manufacturer to replace the LCD screen

3：橫梁不移動

 解決方案：1：檢查數據線是否連接號

           2：檢查是否過載，傳感器是否損壞

           3：是否限位，移動磁鐵

3: the beam does not move
Solution: 1: check if the data line is connected
          2: check whether the overload, the sensor is damaged
          3: whether limit, move the magnet

4：儀表不準確

解決方案：   1：傳感器是否損壞

             2：調整了標定系數

             3：是否年檢

4: the instrument is inaccurate
Solution: 1: is the sensor damaged?
          2: adjust the calibration factor
          3: is the annual inspection?

開關機注意事項:

1開機時主機和計算機的開機順序會影響計算機的通訊初始化設置，所以務必請用戶嚴格按照上述開機順序進行。

2每次開機后要預熱5分鐘，待系統穩定后，才可進行試驗工作。

3如果剛剛開機，需要再開機，至少保證1分鐘的間隔時間。

4在更換夾具后，首先要注意調整好可調擋圈（上下限位開關）。

5尤其在用小力值傳感器做試驗時，一定要調整好可調擋圈的位置，以免操作失誤而損壞小力值傳感器。不要超過傳感器的額定量程。

6任何時候都不能帶電插撥電源線，否則很容易損壞電氣控制部分。

7試驗過程中，不能遠離試驗機。

8試驗過程中，除停止按鍵和急停開關外，不要按控制盒上的其它按鍵，否則會影響試驗。

9試驗結束后，一定要關閉所有電源。

10本計算機是專門用于試驗機控制和數據處理的，請勿在計算機內安裝其它應用軟件，以免試驗機應用軟件不能正常運行。

11計算機要嚴格按照系統要求一步一步退出，正常關機，否則會損壞部分程序，導致軟件無法正常使用。

12不要使用來歷不明或與本機無關的軟盤在試驗機控制用計算機上寫盤或讀盤，以免病毒感染。

Points for attention of switch machine:
1 boot, the host and computer boot sequence will affect the computer communication initialization settings, so be sure to please users in strict accordance with the above boot sequence.
2, after each boot should be preheated for 5 minutes, until the system is stable before you can carry out the test work.
3 if you just boot, you need to boot, at least guarantee 1 minutes interval time.
4, after changing the fixture, we must first adjust the adjustable ring (upper and lower limit switch).
5, especially in the test with small force sensor, it is necessary to adjust the location of adjustable retaining ring, so as to avoid operating mistakes and damage small force sensor. Do not exceed the rated range of the sensor.
6 do not plug the power cord at any time, otherwise it will damage the electrical control parts easily.
7, the test process can not be far away from the test machine.
8 during the test, do not press the button on the control box except for the stop button and the emergency stop switch, otherwise it will affect the test.
9 after the test, be sure to turn off all the power.
10, this computer is specially used for test machine control and data processing, please do not install other application software in the computer, so as to avoid the test machine application software can not run normally.
11, the computer should strictly in accordance with the requirements of the system, step by step exit, normal shutdown, otherwise it will damage some programs, leading to the software can not be used properly.
12 do not use the machine independent and unknown source or origin or diskette in the testing machine control computer disk write or read the disk, to avoid virus infection.

其它

歡迎您選用我公司開發研制的各類檢測儀器。在使用過程中，如出現什么問題，請及時和我們，您將得到良好的售后服務，真誠的希望您能將寶貴的意見，豐富的經驗和獨到的見解反饋給我們，讓我們一起努力，共同提高。

Other
You are welcome to choose all kinds of testing instruments developed by our company. In the process of use, such as what is the problem, please contact us, you will get good customer service service, sincerely hope you can view the precious, rich experience and unique insights back to us, let us work together to jointly improve.

：  

好質量好品牌好服務在北京北廣，更多優惠請。

Contact number: :
Good good quality good service brand in Beijing, please call the Advisory, more concessions.