一.產品名稱：熔體流動速率測定儀-微機
二．熔體流動速率測定儀型號：RTSL-400A
三．熔體流動速率測定儀制造標準：
GB/T3682 《熱塑性塑料熔體質量流動速率和熔體體積流動速率的測定》
ISO1133 塑料熔體質量流動速率（MFR）和熔體體積流動速率（MFR）的測定
ASTMD 1238 用擠壓塑性計測定熱塑性塑料流率的測試方法
四．熔體流動速率測定儀主要用途及功能：
熔融指數儀符合GB/T3682-2000的標準要求，熔融指數儀主要參數同時也滿足ISO1133、ASTM1238標準要求可用于對可用于聚乙烯、聚炳烯、聚苯乙烯、ＡＢＳ、聚酰胺、纖維樹脂、丙烯酸酯、聚甲醛、氟塑料、聚碳酸脂等多種塑料材料的熔體質量流動速率（MFR）或熔體體積流動速率（MVR）來進行測定；采用進口雙顯智能化控溫儀表，控溫精度穩定。
熔融指數儀由微處理器按標準試驗流程進行程序化設定，升溫速度快、恒溫精度高；在填料之后，能迅速恢復恒溫狀態。中文顯示，自動計時，自動切料，自動打印等多種功能。
五．熔體流動速率測定儀主要特點
1、加熱體元件已經淘汰同類產品采用的普通電加熱絲的方式，而采用稀有合金材料鎳鉻金屬壓鑄而成，具有長時間高溫狀態燒不壞的使用特點．
2、即可以做質量法試驗又可以做體積法試驗。根據用戶要求，另配體積法（Ｂ法）位移檢測裝置一套．
3、配有無線遙控開關電源裝置可以遠程操作實驗主機的啟停。
4、該儀器由微機控制。
5、自動計時，自動切料，自動計算熔融指數,自動打印試驗數據等多種功能.（可根據用戶特殊要求配英文操作方法）。
六.熔體流動速率測定儀主要技術參數：
控溫范圍： 室溫---400 ℃
控溫精度： ±0.2 ℃
顯示分辨率： 0.1 ℃
zui大功耗：≤500 W
溫度恢復時間： 4 min
活塞位置檢測：（MVR）
上下環距離： 30 mm
位移控制精度：±0.1 mm
測試范圍：0.03-450g/10min
七．熔體流動速率測定儀標準件參數：
料筒參數：內孔 Φ9.55±0.025ｍｍ
活塞參數：活塞頭Φ＝9.475±0.015ｍｍ；
活塞頭長度 Ｈ＝6.35±0.1ｍｍ
口膜參數：口模：材質為碳化鎢、長：8.000mm±0.025mm擠出孔Φ＝2.095±0.005ｍｍ
口模配置：Φ2.095±0.005/Φ1.18±0.01mm
八．熔體流動速率測定儀參數：
砝碼精度：±０.５％
基本配置： Ａ 0.325 ＫＧ（含壓料桿）
Ｂ 0.875 ＫＧ
Ｃ 0.960 ＫＧ
Ｄ 1.200 ＫＧ
Ｅ 1.640 ＫＧ
注：可根據用戶要求加配備砝碼
九．型號規格：
熔體流動速率測定儀-微機控制
熔體流動速率測定儀-彩色顯示
熔體流動速率測定儀-藍屏顯示
想了解更詳細的產品信息及資訊
電 話：
：吳 芳
手 機：
地 址：北京市海淀區永豐產業基地新材料創業大廈B座
英文資料：
A product name: melt flow rate measurer and microcomputer
Two. The product model: RTSL-400A
Three manufacturing standard:
Determination of thermoplastics melt mass flow rate and the melt volume flow rate of GB/T3682 ""
ISO1133 plastic melt flow rate (MFR) and the melt volume flow rate (MFR) determination
Test method for determination of thermoplastic plastic flow meter with 1238 extrusion plastic ASTMD
============================================
Four. The melt flow rate meter mainly uses and functions:
Melt index apparatus complies with the requirements of GB/T3682-2000 standard, the main parameters of melt index apparatus but also meet the requirements of ISO1133, ASTM1238 standards can be used for melt flow rate of polyethylene, polypropylene, polystyrene, ABS, polyamide fiber, acrylic, resin, POM, fluorine plastic, polycarbonate and other plastic materials (MFR) or melt volume flow rate (MVR) are measured; imported double display inligent temperature control instrument, the temperature control accuracy and stability.
Melt index apparatus by the microprocessor according to standard test process procedures setting, fast heating speed, high precision of constant temperature; in the packing, can quickly restore the constant temperature state. Chinese display, automatic timing, automatic cutting, automatic printing etc..
=============================================================================
Five. The melt flow rate meter main features
1, the heating element is out of ordinary electric heating wire similar products used in the way, and the rare alloy nichrome metal die-casting, characterized by long time high temperature burn not bad
2, that can do the quality test and can do volume test. According to user requirements, the other with volume method (B method) displacement detection device
3, equipped with a wireless remote control switch power supply device can be remoy operated the host start stop.
4, the instrument is controlled by microcomputer.
5, automatic timing, automatic cutting, automatic calculation of melt index, multiple functions automatically print the test data. (according to the special requirements of users with English operation method).
Main technical parameters six:
The range of temperature control: temperature -400 C
The temperature control precision is ± 0.2 ℃
Display resolution: 0.1 ℃
Maximum power: W ≤ 500
Temperature recovery time: 4 min
Piston position detecting: (MVR)
Upper and lower ring distance: 30 mm
The control precision of the displacement: ± 0.1 mm
Test range: 0.03-450g/10min
Seven parameters are standard:
The barrel inner hole of Φ 9.55 ± parameter: 0.025m
The parameters of piston: piston head phi = 9.475 ± 0.015mm;
The piston head length H = 6.35 ± 0.1mm
Oral membrane parameters: Die: made of tungsten carbide, length: 8.000mm ± 0.025mm extrusion hole phi = 2.095 ± 0.005mm
Die configuration: 2.095 ± 0.005/ 1.18 ± 0.01mm
Eight weight parameters:
The weight accuracy: + 0.5%
The basic configuration: A 0.325 KG (including pressing rod)
B 0.875 KG
C 0.960 KG
D 1.200 KG
E 1.640 KG
Note: according to user requirements can be added with weights
Nine types of specifications:
Microcomputer control instrument - Determination of melt flow rate
Melt flow rate instrument - color display
Melt flow rate instrument - the blue screen
Want to know more detailed product information and information
Contact: Wu Fang
Phone:
Address: Beijing city Haidian District Yongfeng industrial base new materials business building B
