型號
Model | AZTS 130S | AZTS 320S |
電源
Power Supply | 交流380V 50赫茲 3相+N+PE
AC 380V 50HZ 3 phase+N+PE |
電流
Maximum Current (SUT/SUTH) (A) | 39 | 46 |
功率
Maximum Power (SUT/SUTH) (KW) | 22 | 25.5 |
使用環境溫/濕度
Operation Environment | +15～+35℃/≤85%RH |
形式
Type | 三廂式
Three Zone |
控制方式
Control Mode | 獨立的冷端和熱端PID調節，熱量和冷量均可連續調節
Independent PID regulation of consecutive cooling and heating capacity |
性能*1
Performance*1 | 溫度范圍
Temperature Range | 低溫區-80℃～+60℃ 高溫區 +60～+200℃
Cold Zone: -80℃～+60℃, Hot Zone: +60～+200℃ |
溫度波動度
Temperature Fluctuation | ≤±0.5℃ |
恢復時間為15分鐘的溫度及負載條件
Test condition with load for 15 minutes recovering time | 帶5kg電路板-55℃/+125℃
-55℃/+125℃ with 5kg electrionic board |
觀察窗
Inspection Window | 多層導電膜加熱觀察窗，尺寸W240mmxH310mmx1
Multilayer glasses with conducting film heating, size W240mmxH310mmx1 |
控制器
Controller System | AZ-1000控制儀表集成西門子S7可編程控制器
AZ-1000 controller integrated with Siemens S7 PLC |
冷凝方式
Condenser | 風冷冷凝器
Air-cooled condenser | 風冷冷凝器
Air-cooled condenser |
內容積 （升）
Interior Capacity (L) | 124 | 319 |
內尺寸
Interior Size | W(mm) | 580 | 700 |
| D(mm) | 510 | 700 |
| H(mm) | 420 | 650 |
外尺寸
Exterior Size | W(mm) | 1400 | 2740 |
| D(mm) | 1780 | 1700 |
| H(mm) | 1950 | 2450 |
標準配置
Standard Configuration | ● 腳輪/Castors
● 照明/Lighting
● USB接口及歷史數據回放及轉換軟件/USB interface and history data review and converting software |
可選配置
Optional Configuration | ○ 電纜孔帶硅膠塞Φ25mm/Cable port with silicon plug Φ25mm
○ 隔板/Shelf
○ 水冷冷凝方式/Water cooled condenser (CST 27 2T, CST 84 2T)
○ 外部插座 220V 10A/Exterior socket 220V 10A
○ LAN接口及遠程控制軟件/LAN interface and remote control software
○ 數字量輸入報警接口x4/Digital alarm input channels x 4
○ 數字量輸出繼電器接口x4 (試驗品用)/Auxiliary relay digital output channels x 4 (for specimens)
○ 額外溫度采集通道x1 用于測量試驗品溫度 數據可儲存回放(T型熱電偶)
Additional temperature sampling channels x 1, for sampling temperature of test specimen, data can be reviewed and recorded (T thermocouple)
○ 根據試驗品溫度切換高低溫區功能
Switching the test zone accoding to the test specimen temperature
○ 額外模擬量采集通道x4 數據可在控制器上儲存回放(PT100，T型熱電偶，4～20mA，0～10V, -10V～10V可選)
Additional analog sampling channels x 4, sampling data can be reviewed and recorded (Option: PT100/T thermocouple/4～20mA/0～10V/-10V～10V)
○ 額外模擬量采集通道x8 數據可在控制器上儲存回放(PT100，T型熱電偶，4～20mA，0～10V, -10V～10V可選)
Additional analog sampling channels x 8, sampling data can be reviewed and recorded (Option: PT100/T thermocouple/4～20mA/0～10V/-10V～10V)
○ 模擬量輸出通道x3 (設定高溫，設定低溫，采樣溫度)
Analog output channels x 4 (Setting high temperature/Setting low temperature/measured temperature)
○ 干燥新風補償/Compressed dry air purging system |
*1: 性能指標在室溫為+25℃時測定;傳感器處于空氣處理單元出風口;
All the above specifications are measured at +25℃ room temperature and the sensors are installed at blow-out of air conditioning unit; |
