| imensional Readout | | English and Metric
Gaging Range English: 0.005-10 inches;
Metric 0.13-100 mm (depending upon material) |
| Digital Resolution | English Units | ± 0.0001" on 1" range
± 0.001" on 10" range |
| | Metric Units | ± 0.001 mm on 10 mm range
± 0.01 mm on 100 mm range |
| Measuring Mode | | Sets mode for contact, delay line or immersion transducers |
| Readout Mode | | Selects digital display for thickness or velocity |
| Pulser | Risetime | 5 ns |
| | Amplitude | 150, 250, 400 volts
Peak into 50 Ohms |
| | Repetition rate | 625, 1250, 2,500, 5000 Hz |
| | Damping | 15 to 520 Ohms - 1 Ohm increments |
| Receiver | Adjustable gain | 100 dB |
| | Automatic gain control | 100 dB dynamic range |
| | Reject | Variable threshold to full scale |
| Bandwidth | Bandwidth | 30 MHz (3 dB down) |
| Attenuator | Attenuator | 0, 10, and 20 dB selectable |
| A-Trace Display | Sweep width | Switchable down to 50 ns/Div
Continuously adjustable |
| | Sweep delay | 1 ms to 80 ms |
| | Display | Dual Trace; A-Trace plus selectable
Gate Traces (IP, IF, T or TAC) |
| | Display modes | Full wave RF, positive or negative
Rectified |
| T-Gate | | Thickness gate with adjustable sync |
| T-Gate Start/Stop | | Selectable on positive or negative half cycles |
| IP-Gate | | 0.25 to 20 ms (contact), 1.0 to 0 ms (continued) (delay or immersion) |
| IF-Gate | | 0.1 to 8.0 ms |
| TAC-Gate | | Adjustable thickness amplitude
Compensation of gain
Start control: 0.02 to 6 ms
Amplitude control: 0 to 100 dB
Slope control: 0.1 to 50 ms |
| Alarms | | Three functions: LO, HI, LO/HI |
| Outputs | | Alarms, Analog thickness
Serial RS-232C, IP Sync and USB |
| Inputs | | External sync |
| Power Source | Power Source | Battery & AC |
| Power Consumption | | 50 Watts |
| Warranty | | One year |
