強大的系統功能
軟件兼容winXP、win7、win8系統 Software support XP、win7、win8 system.
軟件支持中英文 Software support Chinese and English language.
快捷自由的頁面布局
軟件增設快捷鍵，方便使用 Software add shortcuts, easy to use
支持將菜單及控制區收起操作，以擴大繪圖區的有效區域面積 Support pack up the menu and control operation, to enlarge the drawing effective area
豐富的數據處理系統
圓弧、線自動識別 Automatic identification of circular arc, the line
擬合可選擇點選或框選 Fitting choice click or marquee
軟件標注與CAD同理 Software similarly marked with CAD
支持連續標注、基準標注、支持任意插入點 Support continuous annotation and datum mark, support any insertion point
支持圖形自由旋轉及坐標自由旋轉 Support the freedom of graphic rotation and coordinate rotation
支持坐標點標注 Support the coordinate points label
捕捉開關打開時，自動生成及捕捉交點、圓心 、線段中點、端點、圓弧交點、中點、切點等特征點
While capture switch is opened, automatically generated and capture the intersection point, circle, line midpoint, endpoint, circular intersection, midpoint, point of tangency feature points, etc
完善的數據保存模式
原始數據自動保存，便于多次標注 Original data automatically saved, facilitate multiple labels
可將測量的圖形結果轉化成DXF格式 Measurement graphic results can be transferred into DXF forma
鏡像功能，可保存標注后文件 The mirror function, can save after standard file.
便捷的控制方式
可對Z1、X軸當前位置進行監控 Can monitor the current position of the Z1, X axis
測量長度可任意設定 Measuring length can be set freely.
具有測針自動接觸、自動抬起、自動回退功能 Needle automatic contact, automatic lift, automatic back.
可以對操作進行無限次的撤銷及恢復操作 The operation can be unlimited undo and restore
SP2000特色的功能
非比例放大：即使在非比例放大的情況下，也能進行正常的角度、圓弧、水平、垂直、線性等標注。
自動標注：在進行批量測量時，測量保存為模板，再次測量導入模板即可完成自動標注，大大提高測量效率。
數據合成：對于類似直槽工件無法一次測量完成，通過擺放角度進行兩次測量，然后通過軟件進行數據合成。
間斷測量：可對工件進行分段編程（采樣間隔、采樣速度），提高客戶測量效率。
粗糙度測量軟件 Roughness Software System
特色數據再處理功能：當實際測量部分與需要被測量部分有差時，可框選出需要進行數據處理部分的粗糙度曲線，將該部分曲線截取出來重新處理分析。Data reprocessing: After the measurement is completed, you can select the data processing part of the measurement curve to reprocess the analysis.
測量圖形不僅可等比放大，且可單軸非比例放大。Measurement graphics can not only be magnified, but also uniaxial non-proportional amplification.
測量報告分為當前報告及統計報告，統計報告可用于分析同個工件重復測量數據及同批量工件的測量數據，便于用戶直觀看出數據的變化。The measurement report is divided into the current report and the statistical report, and the statistical report can be used to analyze the repeated measurement data of the same workpiece and the measurement data of the same batch of workpieces, so that users can see the change of the data intuitively.
設備尺寸 Equipment size
環境要求 Environment Specifications
電 源：AC 220V±5% 50Hz 單獨地線
功率需求：約500W
環境要求：現場溫度：15～25℃、理想溫度：20±2℃
相對濕度：＜85%
室內周圍應無影響測量的灰塵、振動、噪音、氣流、腐蝕性氣體和較強磁場
Power supply： AC 220 v + 5% for 50 hz Seperate groud wire
Power requirements: about 500 w.
Environmental requirements: the temperature: 15 ~ 25 ℃, ideal temperature: 20 + 2 ℃
relative humidity: < 85%
Around the indoor should have no affect the measurement of dust, vibration, noise, air, corrosive gas and strong magnetic field.
設備配置 Equipment configuration
售后服務 After-sale service
質保期：從安裝驗收合格之日起12個月，但不超過發貨之日起15個月。在此期限內因我方原因造成的機器故障，負責免費維修。
質保期外：我公司采取定期回訪與隨時電話咨詢相結合的售后服務制度，力求及時發現并解決用戶使用中存在的困難和問題，為用戶提供技術咨詢。
公司負責為用戶免費提供計量測試技術咨詢服務。
公司以成本價終身為用戶提供設備保修服務。
如公司接到用戶設備故障請求服務電話，24小時響應，如有必要72小時內派技術人員赴現場解決問題。
公司備有備品備件庫，終身負責為用戶以成本價提供備品備件服務。
公司負責以優惠價終身為用戶提供技術升級、改造等售后增值服務。
用戶所在地區如有我公司地區辦事處，其售后技術服務事宜由我公司地區辦事處全面負責。
Warranty Period: Within 12 months from the date of acceptance, but not exceeding 15 months from the date of shipment.
During this period machine failure caused by our side should be maintained free of charge.
Extra Warranty Period: we will take telephone and regular visit to users as after-sale advisory service.
Our company is responsible for the technical advisory services of metrology for user free of charge.
We will provide life warranty services of machine for users with cost price.
If we get telephone service request about equipment failure from users, we will response to the request in 24 hours,
if necessary we will send technical engineer to the customer’s site to solve problems within 72 hours.
We have spare parts in stock, will provide life warranty services of spare parts for users with cost price
We will provide users with lifelong after-sales value-added technical service，such as technical upgrades，retrofit，etc.by preferential prices.
If there is my company’s office in the region of the users, it will fully responsible for the after-sale technical services.
